Black Gold Oilfield Service 400D
Formerly Gates Sea Horse 400 Fuel Transfer - 4110SH
Type: Petroleum Hose
Sub Type: Petroleum Petro Transfer Hose
RECOMMENDED FOR: Transfer of water, petroleum based fluids, dilute acids, chemicals and abrasive slurries used in oil and gas well stimulation and fracking. Transfer of refined fuels (commercial gasoline, diesel fuel) oils and other petroleum products. Transfer hoses are designed for intermittent contact with refined fuels and must be drained after use. Ideal for offshore/onshore dock hose transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required. For bio-diesel and other alternative fuel applications, see Fuel Master™ Xtreme™ 150SD. Petroleum transfer hoses may be used with all grades of bio-diesel only if the exposure is intermittent and the hose is drained between uses.
CAUTION: Do not convey fuels over 120°F (+49°C).
Type C (Nitrile). Black.
Synthetic, high tensile textile with static wire.
Type A (Neoprene). Black with red spiral stripe. (4110SH)
Type L (Ultra High Molecular Weight Polyethylene) (4110MT)
-40°F to +180°F (-40°C to +82°C) continuous service.
200’ length coiled and wrapped in polyethylene.
Continuous transfer label. Example: "GATES Black Gold® Oilfield Service 400D AR psi (2.76MPa) WP Made in U.S.A."
Contact JGB for proper hose fitting requirements.
Petroleum Transfer Hose
Tube: RMA (Class A) High oil resistance.
|Item No.||Nom. ID||Nom. OD||Min. Bend Radius||Suction||Max. W.P.||Wt. Per Ft.||Request a Quote|
|In||mm||In||mm||In||mm||In / Hg||mm / Hg||psi||MPa||Lbs.||Kg|
* All Gates hose names are registered trademarks of Gates Corporation.