Dixon Shank / Water Fittings
Dixon Steel King Hose Menders
Vendor: Dixon Shank / Water Fittings
Coupling Type: Industrial / Specialty Couplings & Accessories
1 clamp each end - 2 clamp each end
Shank / Water Fittings
- The working pressure may vary with the construction of the hose, the type of clamping system used and the application. Consult the JGB for recommendations.
- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement. For additional information and detailed instruction on testing procedures, see the Rubber Manufacturers Association (R.M.A.) handbook.
- They are not for compressible products such as air, nitrogen or steam.
|Size||for 1 clamp each end||for 2 clamp each end|
|Part #||Part #|