Rubber Covered Hose of FEP/PFA - JACK-CHEM
Jack-Chem has been custom engineered for lasting service in the most demanding applications. Jack-Chem starts with a smooth; non-stick FDA approved white FEP fluoropolymer, PTFE and PFA liners can be custom ordered. Two plies of synthetic rubber reinforced with horizontal fabric braid are permanently bonded to the FEP tube. A wire helix is included to support the shape in full vacuum service and to prevent kinking. This provides a grounding path for electrical charges through the exterior body of the hose. For materials that create static buildup on the inner FEP liner, a black conductive FEP is required to dissipate the charge. The entire hose is protected by an abrasion resistant rubber cover that will not fade or discolor with age and is also weather resistant.
New-FEP Liner flared over flange retainer face for continuous smooth media contact with FEP liner
* White Fluoropolymers are FDA approved, black conductive materials are not.
|Temperature Rating:||-40°F (-40°C) to +300°F (+148°C). Contact JGB Customer Service for temps over 300°F.|
|JC-08||JCB-08||0.50||0.87||550 PSI||2200 PSI||Full||3.0||.33 lbs.||Request Quote||Request Quote|
|JC-12||JCB-12||0.75||1.25||450 PSI||1800 PSI||Full||3.5||.60 lbs.||Request Quote||Request Quote|
|JC-16||JCB-16||1.00||1.50||450 PSI||1800 PSI||Full||4.0||.73 lbs.||Request Quote||Request Quote|
|JC-24||JCB-24||1.50||2.00||400 PSI||1600 PSI||Full||8.5||1.20 lbs.||Request Quote||Request Quote|
|JC-32||JCB-32||2.00||2.50||375 PSI||1500 PSI||Full||10.5||1.45 lbs.||Request Quote||Request Quote|
|JC-48||JCB-48||3.00||3.50||175 PSI||700 PSI||Full||25.0||2.40 lbs.||Request Quote||Request Quote|
|JC-64||JCB-64||4.00**||4.50||150 PSI||600 PSI||Full||42.0||3.55 lbs.||Request Quote||Request Quote|
** 4" is available with a 300-400 ft minimum run.