Silcon Med-X Platinum Cured Medical Grade Silicone Tubing
Vendor: New Age
- Silicone elastomer meets USP Class VI requirements
- Manufactured under good manufacturing procedures in a controlled environment
- Platinum cured for the highest degree of purity (least extractables)
- Reusable — will withstand repeated sterilization
- Nonreactive to body tissues and fluids
- Applications include pharmaceutical, biomedical, health and beauty, food, and beverage handling
-100°F to 400°F
Individual, heat-sealed polybags
Thermobarb® barbed fittings , Oetiker® ear type clamps , Kwik Clamp™ nylon double bond hose clamps , Worm gear clamps
|PART NO.||iD||OD||Wall||Request a Quote|
Add length suffix to part number when ordering.
Example: 50 ft. of .030" I.D. x .160" O.D. tubing is part number 284 0404-50.
BOLD indicates the critical dimension for fittings application.
SILCON MED-X tubing is made under good manufacturing procedures and conforms to the biocompatibility requirements of USP Class VI.
SILCON MED-X’s surface properties resist sticking and encrustation and will not support bacteria growth. The tubing is soft, pliable, and contains no plasticizers which could leach out, causing flow contamination or tube hardening.
Other sizes and 60A durometer material are also available - call for details.
SILCON MED-X is not recommended for implantable or in-body uses. Care is recommended in the selection and application of fittings and clamps as sharp barbed fittings or unlined metal clamps could tear into the wall.
†If exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced.
SILCON MED-X is supplied in individual, heat-sealed polybags and should be sterilized prior to use.
Hardness, Shore A ±5
Tensile Strength, psi
Elongation at Break, %
Modulus at 100 %
Tear Resistance, Die B ppi
Temperature Range, °F
Temperature Range, °C
Compression Set, %
-100 to 400
-73.3 to 204.4