Dixon Double Bolt Clamps


Description   Photograph
with Saddles - without saddles  
Dixon Double Bolt Clamps
Coupling CategoryManufacturer 
Clamps Dixon - Clamps 

A rugged, plated iron two-bolt clamp with machine bolts and hex nuts.
  • inner surface has dual gripping ridges
  • bolt lugs are reinforced to prevent bending out of alignment
  • measure hose OD accurately before ordering clamps
  • Consult JGB when using double bolt clamps on helical wire hose.
  • Torque values for clamps are based on dry bolts. 
    The use of lubricant on bolts will adversely effect clamp performance.Safety Alert - Hose, Couplings, and Hose Assemblies 

with saddles

Hose OD Plated Iron Opt Qty Torque
from to Part # in ft. lbs.
3-32/64" 3-52/64" 400 25 40
3-50/64" 4-4/64" 431 20 40
4-2/64" 4-18/64" 463 20 40
4-16/64" 4-60/64" 525 10 60
4-32/64" 5-16/64" 550 10 60
5-8/64" 5-44/64" 600 10 60
5-44/64" 5-60/64" 639 10 60
5-60/64" 6-32/64" 675 10 60
6-32/64" 7-36/64" 769 10 60
7-44/64" 8-12/64" 818 5 125
8-16/64" 8-56/64" 875 5 125
8-60/64" 9-56/64" 988 5 125
9-60/64" 11-24/64" 1125 5 125
11-12/64" 13" 1275 3 125
12-12/64" 14" 1360 2 200
13-12/64" 15" 1450 2 200
15-4/64" 17-32/64" 1700 2 260


without saddles

Hose OD Plated Iron Opt Qty Torque
from to Part # in ft. lbs.
1-8/64" 1-12/64" J48 100 15
1-12/64" 1-24/64" J49 50 21
1-28/64" 1-34/64" JX49 25 21
1-40/64" 1-52/64" DL14 25 40
1-48/64" 2-3/64" DL20 25 27
2-7/64" 2-19/64" DL241 25 27
2-20/64" 2-40/64" DL321 25 40
2-32/64" 2-48/64" DL275 25 40
2-48/64" 3-4/64" DL306 20 60
3-4/64" 3-24/64" DL328 20 60
3-16/64" 3-32/64" DL350 20 60
1  investment cast carbon steel