Parker Industrial
WALRUS EPDM Water Suction Hose - Series SW500

WALRUS EPDM Water Suction Hose - Series SW500

Type:  Water Hose

Vendor:  Parker Industrial

Application:

Parker Industrial WALRUS EPDM Water Suction Hose
Series SW500

  • Alkalies, brine, glycols, herbicides, mild chemicals, slurries, water
  • Agriculture, construction, general industrial, irrigation, surface mining

Series SW500 is a suction and discharge hose designed to handle alkalies, brine, glycols, herbicides, mild chemicals, slurries and water. The hose construction incorporates a dual wire helix that provides full suction capability and kink resistance. The EPDM cover is resistant to abrasion, heat, mild chemicals and weathering.

Design Factor:  4:1
Vacuum:  Full
Industry Standards:  None applicable

Tube:

Black EPDM

Reinforcement:

Multiple textile plies with dual wire helix

Cover:

Black EPDM; wrapped finish

Temperature:

-40°F to + 200°F (-40°C to +93°C)

Packaging:

Coils

Branding:

PARKER SERIES SW500 WALRUS™ EPDM WATER SUCTION HOSE XXX PSI WP MADE IN USA

Couplings:

Contact JGB for proper fitting recommendation and coupling procedure.

Colors:

Black

Part No. ID ID Reinf
Plies
OD OD Approx Wt Min
Bend
Rad
Max
Rec
WP 
Std
Pack
Qty 
Request Quote
(in) (mm) (in) (mm) (lbs/ft) (in) (psi) (ft)
SW500-1500 1-1/2 38.1 2 1.875 47.6 0.53 6 200 100 Request Quote
SW500-2000 2 50.8 2 2.438 61.9 0.76 8 150 100 Request Quote
SW500-2500 2-1/2 63.5 2 2.938 74.6 1.14 11 150 100 Request Quote
SW500-3000 3 76.2 2 3.438 87.3 1.46 14 150 100 Request Quote
SW500-4000 4 101.6 2 4.5 114.3 2.12 18 150 100 Request Quote
SW500-6000 6 152.4 2 6.625 168.3 3.71 28 150 100 Request Quote

Warning!

  • Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
   WARNING: Cancer and
   Reproductive Harm -
   www.P65Warnings.ca.gov