Spirstar - HOSE TYPE 13/2

Vendor: Spirstar
Category: Hydraulic Hose
Category: Water Hose    Sub Type: Water Blast Hose

Oil & Gas

grease injection


heat exchanger tube cleaning, surface preparation (concrete removal, surface cleaning of buildings, paint removal)


pressure test equipment (valves, tooling and control panels)

   Tube:Polyamide (PA)
   Reinforcement:2 layers of high-tensile steel wire
   Cover:Polyamide (PA)
Temperature:-22F to 140F
Branding:SPIR STAR 13/2
Couplings:MP Insert fittings, Steel Sleeves, NPTF Male Fittings
Contact JGB for proper fitting recommendation and coupling procedure.P

ID OD Working Pressure Burst Pressure Bend Radius Weight Request a Quote
0.51 inch 0.76 inch 10.005 psi 25.010 psi 7.87 inch 0.292 lbs/ft Request Quote

Available Fittings
Fitting Type Part # Thread Material Hose Part
Sleeve 11320101 - Steel -
MP fitting 41320205A 9/16"x18UNF LH AISI 316Ti -
Male fitting 31320401A 1/2"x14NPTF Steel -
31320405A 1/2"x14NPTF AISI 316Ti -
Female swivel 24°/60° 21320311A G1/2" Steel 51060311
21320315A G1/2" AISI 316Ti 51060315
Female swivel with O-Ring 21320101A M22x1.5 Steel 51360221
21320241A M24x1.5 Steel 51,321,206
21320245A M24x1.5 AISI 316Ti 51320205
Type M female swivel 21320641A 1"x12UNF Steel 51360641
21320645A 1"x12UNF AISI 316Ti 51360645, 51360643
Swivel nut 51360641 1"x12UNF Steel -
51360643 1"x12UNF Stainless steel -
51360645 1"x12UNF AISI 316Ti -
51060311 G1/2" Steel -
51060315 G1/2" AISI 316Ti -
51360221 M22x1.5 Steel -
51321206 M24x1.5 Steel -
51320205 M24x1.5 AISI 316Ti -