Hose and Hose Assemblies. JGB's Hose, Fitting, and Valves Catalog
Request a Quote
Search Website 

Flo-Mate Couplings


Discontinued

This item has been discontinued by the manufacturer. Please contact JGB for a comparable replacement.

Description   Photograph
Sockets / Plugs  
Flo-Mate Couplings
Coupling Type
Hydraulic Couplings & Adapters
Coupling CategoryManufacturer 
Hydraulic Fittings Dixon - Hydraulic Fittings 

Sockets
  (non-valved)

Straight Stem  Hose Shank

Size

  Hose I.D.   

Part #
1/4" 1/4" FMC204
1/4" 1/4" FMC204L  
1/4" 5/16"  FMC205~
1/4" 3/8" FMC206
1/4" 3/8" FMC206L
3/8" 3/8" FMC306
3/8" 3/8" FMC306L
3/8" 1/2" FMC308
3/8" 1/2" FMC308L
1/2" 1/2" FMC504~
1/2" 1/2" FMC504L
1/2" 3/4" FMC506
1/2" 3/4" FMC506L

45° Stem  Hose Shank

Size

  Hose I.D.   

Part #
1/4" 1/4"

FMC224~

1/4" 1/4" FMC224L~
1/4" 5/16" FMC225~
1/4" 3/8" FMC226~
1/4" 3/8" FMC226L~
3/8" 3/8" FMC326~
3/8" 3/8" FMC326L~
3/8" 1/2" FMC328~
3/8" 1/2" FMC328L~

90° Stem  Hose Shank

Size

  Hose I.D.   

Part #
1/4" 1/4"

FMC214

1/4" 1/4" FMC214L~
1/4" 5/16" FMC215~
1/4" 3/8" FMC216
1/4" 3/8" FMC216L~
3/8" 3/8" FMC316~
3/8" 3/8" FMC316L
3/8" 1/2" FMC318
3/8" 1/2" FMC318L~
Plugs  

Female NPT  (steel)

Size

  Thread

Part #

1/4"

1/8"

FMP251F~

1/4" 1/4" FMP252F~
1/4" 3/8" FMP253F~
3/8" 1/4" FMP352F
3/8" 3/8" FMP353F

Male NPT  (brass)

Size

  Thread

Part #

1/4"

1/8"

FMP251

1/4" 1/4" FMP252
1/4" 3/8" FMP253
3/8" 1/4" FMP352
3/8" 3/8" FMP353
3/8" 1/2" FMP354
1/2" 1/2" FMP554
1/2" 3/4" FMP556

Flo-Mate Couplings offer maximum flow with an unrestricted flow path, permitting maximum temperature control and minimum coupling size. Plugs are designed short so that they can be easily recessed below a mold surface to avoid damage (when mold is changed or stored). Non-valved design should be used where maximum flow is needed and automatic shut-off is not required.  Suitable for use with hot oil, water glycol and high temperature water.       
Socket seal is Viton®
Service pressure is 200 PSI
Sockets, sleeves and valves are brass
Sleeve spring and valve spring are 302 stainless steel
Locking balls are 404 stainless steel

Safety
Alert

Warning:
Over-pressurization could result in a sudden failure of the coupling causing severe bodily injury or death.  Be sure to select the proper coupling for your application and use it only within the specified service pressure ranges.  Couplings do wear out. In order to avoid severe bodily injury or death, couplings must be routinely checked for condition and replaced if necessary.