Dunlop
Waterblast WB10 Hose

Application:

Designed for very high pressure waterblasting.

  • Surface Preparation
  • Pavement Maintenance
  • Paint Removal
  • Corrosion and dust removal
  • Welding residue, drawing compounds removal
  • Abrasive Jet Cutting of Hard Materials
  • Water Jet Cutting of food and soft materials
  • WaterJets Texture Sandstone
  • Hydrodemolition of Concrete
  • Tank Cleaning

Tube:

NBR (Nitrile rubber)

Reinforcement:

Four Spiral Layers

Cover:

NBR (Nitrile rubber)

Temperature:

-40°F to +160°F

PRECAUTIONS:


• Restricted to use as high pressure waterjetting hose where safety factors of 2.5:1 are the industry norm. Due to the safety critical nature of these very high pressure hoses, it is recommended that pre-fitted and tested assemblies are sourced.

• No warranty is given for assemblies made with non-approved fittings.

• JGB recommends referencing the recommended practices for the use of manually operated high pressure waterjetting equipment published by the Waterjet Technology Association (WJTA).


Part # Series ID OD WP Burst Pressure Bend Radius Weight Request Quote
in in psi psi in lbs/ft
168-0082-10000D WB10 1/2 0.969 10000 25000 8.00 0.61 Request Quote
168-794-16 WB10 1 1.528 10000 25000 14.00 1.46 Request Quote