GAMMA™-HTA / Hot Tar and Asphalt Hose
Application:This rugged hose is specifically designed for the transfer of petroleumbased products such as high temperature asphalt, tar, and hot oils. Suitable for suction and discharge service on rail transport cars, tank trucks, bulk stations, storage tanks and disposing units.
SAFETY NOTE: Texcel recommends using Dixon Valve and Coupling’s Boss™ 4-Bolt Clamp System for Hot Tar and Asphalt hose. Please consult Dixon’s selection and installation recommendations, including bolt re-tightening procedures, to insure proper hose assembly.
Black, special synthetic acrylic rubber, heat and abrasion resistant
High tensile tire cord plies; helix wire
Black, CR anti-static, with a smooth abrasion, weather and heat resistant wrapped cover
-20°F to +350°F (Maximum service temp. 350°F, intermittent use only)
TEXCEL® GAMMA™-HTA - HOT TAR & ASPHALT HOSE 150 PSI W.P.
Contact JGB for proper fitting recommendation and coupling procedure.
Cut Lengths Available.
|Request a Quote|