Cementing Hose
Successful cementing operations result in a cement
sheath to bond and support casing and
provide zonal isolation. Good zonal isolation
helps prevent the loss of production, control
inter-zonal flow and/or flow to the surface, reduce
water production and improves confinement of
stimulation treatments.
JGB Enterprises supplies a full line of the toughest,
most versatile, expert Cementing Hose Assemblies.
We provide a wide range of sizes that
can handle up to 5000 psi. Our assemblies will
handle the tens of thousands of gallons of
cement necessary for expert casings.
Call one of our specialists at (315) 451-2770 or Contact us by email at
Eagle Bulk® Material HD Hose
Material handling hose used for the pneumatic transport of abrasive materials such as cement, sand and other dry abrasive bulk materials. Its anti-static tube liner compound makes this hose a great choice for the anti-static transfer of materials that create static buildup.
4" ID
4" ID
Vendor: JGB Private Brand
Eagle Hot Air® Blower Hose
Hot air transfer hose for conveying hot air up to 400°F from a blower or compressor to tanks on dry bulk material carriers. The hose tube and cover are constructed of black EPDM rubber. The hose has multiple plies of high tensile textile with dual steel wire helix reinforcement for strength.
3" ID
3" ID
Vendor: JGB Private Brand
J-FLEX 12M SAE 100R12 Hydraulic Hose
Reinforced with four high tensile steel spirals, this hose is designed for hydraulic systems with high peak pressures and arduous operating conditions. The special synthetic cover is designed to resist hydraulic oil, weather, and abrasion. The synthetic rubber tube is resistant to mineral, vegetable, and glycol based hydraulic oils. A MSHA cover is available.
3/8" to 2" ID
-40°F to 248°F (257°F intermittent)
3/8" to 2" ID
-40°F to 248°F (257°F intermittent)
Vendor: JGB Private Brand
J-FLEX 13M SAE 100R13 Hydraulic Hose
This hose comes reinforced with 4 or 6 high tensile steel spirals and has a working pressure of 5000 psi and a burst pressure of 20000 psi. This hose is designed for hydraulic systems with high peak pressures and arduous operating conditions. A MSHA cover is available.
3/4" to 2" ID
-40°F to +248°F (+257 °F discontinuous)
3/4" to 2" ID
-40°F to +248°F (+257 °F discontinuous)
Vendor: JGB Private Brand