Drillsite Support Fittings
Dixon Boss LPS Hammer Union
Dixon One Piece 4" Frac Fitting Hammer Union
Dixon Two Piece 4" Hammer Union Nut
Fresno Gates and Lifts
JGB carries all types of Hammer Unions for use in high-pressure, heavy-duty flow line connections in the oil industry. These hammer unions are used in the transfer of water, brine, water-based acids and gelatinous proppant (sand). They work at pressures ranging from 2000 NSCWP (non-shock cold working pressure) to 15000 NSCWP.
JGB Aluminum Cam & Groove Fittings
We carry a complete line of Aluminum Cam & Groove Hose Fittings, also called Cam Lock Fittings or Cam & Groove Couplings. JGB Aluminum Cam & Groove Fittings are good for applications where frequent or rapid changes of hoses are required because they are easy to connect and good for avoiding leaks. They may be used for petroleum trucks and for use in suction and discharge applications.
Please note that Cam & Groove Fittings are not suitable for steam, air, or any type of compressed gas.
King Combination Nipples
LN200 Series – Wafer Butterfly Valve
Plate Strainer - Aluminum
Polycarbonate Sight Glass / Strainers
Series G28 Hinged Lever Coupling C-04
Standard Grooved Coupling for Vic Type Clamp
The 4" Munro Cam Valve
WS-Series Blowout Prevention Safety Coupling - Quick Release Couplings
Aluminum Lay Flat Hose Coupling
Stainless Steel Lay Flat Hose Coupling for Produced Water
Layflat Hose Couplings for Produced Water
Large Diameter Shank Couplings
Large Diameter Shank Couplings are designed for use with large diameter lay flat hose in agricultural, energy, and industrial applications. A lightweight aluminum grooved shank, easily installed, field repairable, and reattachable coupling. This coupling consists of a hose shank and a segmented clamp collar. One end of the shank is machined to accept the mating collar. The opposite end has a machined groove. The clamp collar is easily assembled to the hose using a hex (Allen) wrench. Large Diameter Shank Couplings can be used with PVC/Nitrile Hose or PU hose.