Hydraulic Hose & Fittings
JGB Enterprises, Inc. carries Hydraulic Hose in the sizes, lengths & vacuum ratings for any low to high-pressure apparatus. Most of our Hydraulic Hoses come with a choice of covers depending on usage conditions. Along with our bulk hose, JGB custom assembles Hydraulic Hose in many variations. We also carry hydraulic Fittings, Adapters, and Couplers to work with any type of hydraulic systems with any pressure rating requirements. JGB can provide low pressure hose to ultra-high pressure hydraulic hose for arduous operating conditions needing extremely high flexibility.
JGB also offers J-FLEX® hose, our own private brand of hydraulic hose products. Download J-FLEX® Hose spec sheets or use the J-FLEX® Hydraulic Hose Comparison table to help select the proper J-FLEX® hydraulic hose for your application.
Call one of our specialists at (315) 451-2770 or Contact us by email at
Type A - an inner tube of oil-resistant synthetic rubber, a single wire braid reinforcement, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid of appropriate material can be used over the inner tube or over the wire reinforcement (or both) anchoring cover to the reinforcement wire.
Type AT has the same construction as Type A, but a Type AT cover is designed for fittings that do not require removal of the cover (skiving).
Type A - requires skiving to assemble with fittings.
Type AT - the cover does not need to be removed to apply fittings.
Type S - has working pressures of ISO 1436-1, Type 2SN.
Nonconductive 100R7 - typically has an orange cover and appropriate layline with a pressure capacity similar to that of 100R1.
Type A - an inner tube of oil-resistant synthetic rubber, 4 spiral plies of wire wrapped in alternating directions, and an oil and weather resistant synthetic rubber cover. A ply, or braid, of suitable material may be used over the inner tube and/or over the wire reinforcement to bind the synthetic rubber to the wire.
Type AT - same construction as Type A, but with a cover designed to apply fittings without the need for skiving.
Type A has an PTFE inner tube reinforced with a one braid of stainless steel.
Type B - same construction as Type A but features an electrically conductive inner surface to prevent buildup of electrostatic charge.
Nonconductive - typically has an orange cover with an appropriate layline. The working pressure rating is 3000 psi for all sizes.
1. Have an average minimum life of 30,000 cycles at full rated capacity.
2. Have a minimum burst pressure of at least twice the rated operating pressure.
- J-FLEX® 2SN5K Exceeds 100R2AT Hydraulic Hose
- J-FLEX® 4SH XFLEX Hydraulic Hose
Hydraulic Hose Fittings & Accessories
- CEJN / SERIES 358 - Quick Connect Pressure Testing Hydraulic Couplings
- Foster Manufacturing Sockets
- GATES C14-MP Hydraulic Male Pipe Coupling
- GATES C4-FFORX45 Hydraulic Coupling for Low Pressure Hose
- Stainless Hydraulic Hose Fittings SHF Metric Adapters 316 JIC X BSPT